Skip to content
→Analyse your video hooks with AI Agents
Free tool · October 2026 benchmarks

Hook rate calculator, with October 2026 Meta video ad benchmarks

Hook rate is the share of impressions where someone watched at least 3 seconds of your video: 3-second plays divided by impressions. 22,150 plays from 100,000 impressions is a 22.15% hook rate. GoMarble's October 2026 benchmarks put the median Meta video ad hook rate at 22.15% across 680 ad accounts, with the middle half between 15.81% and 29.11%.

Enter impressions and 3-second plays to get your hook rate and see where it sits. Add ThruPlays for hold rate, or a target to see how many plays it takes.

Find your strongest video hooks Connect Meta Ads and AI Agents analyse creative across campaigns

At a glance

  • Median hook rate for Meta video ads in October 2026: 22.15%, across 680 ad accounts.
  • The middle half of accounts sat between 15.81% (25th percentile) and 29.11% (75th percentile).
  • Video ads also had a higher median CTR than image ads (2.38% against 2.07%), while image ads had the higher median ROAS (2.53 against 2.35).

Use numbers from one Meta video ad, ad set or campaign over the same date range. Impressions and 3-second plays give hook rate. ThruPlays and a target are optional.

Hook rate

-

Hold rate

-

Plays needed for a target hook rate

Type a target, or pick a point from the Meta video ads, October 2026 quartiles. Uses the impressions above.

%

3-second plays needed

-

Hook rate = 3-second plays ÷ impressions × 100. Hold rate = ThruPlays ÷ 3-second plays × 100. Plays needed = impressions × target ÷ 100, rounded up.

Video vs image vs carousel, Meta Ads, October 2026

Sort by any column. Each row is a published ad-format cell. "Not published" means no cell exists for that format, not zero.

Source: GoMarble monthly benchmarks, October 2026. Quartiles across ad accounts. Hook rate is reported for video ads only. CPM and CPA in USD.
Hook rate Video 15.81% 22.15% 29.11% 680
CTR (all clicks) Video 1.38% 2.38% 3.98% 680
CTR (all clicks) Image 1.24% 2.07% 3.51% 700
CTR (all clicks) Carousel 1.10% 2.02% 3.30% 280
CPM Video $10.83 $20.12 $38.22 160
CPM Image $10.99 $18.35 $32.79 180
Conversion rate Video 0.74% 1.67% 3.06% 240
Conversion rate Image 0.70% 1.36% 2.56% 280
ROAS Video 1.11 2.35 5.71 240
ROAS Image 1.17 2.53 6.03 280
CPA Video $26.30 $48.70 $83.50 67
CPA Image $26.44 $54.84 $106.80 77
CPA Carousel Not published Not published Not published Not published

1. Hook rate benchmark: Meta video ads, October 2026

This row is the video-ad cell of GoMarble's October 2026 monthly benchmarks. Hook rate here is 3-second plays divided by impressions. The 25th and 75th percentiles bound the middle half of the 680 accounts, and every account counts once, whatever it spent.

Source: GoMarble monthly benchmarks, October 2026. Quartiles across ad accounts.
PlatformAd format25th percentileMedian75th percentileAd accounts
Meta AdsVideo ads15.81%22.15%29.11%680

The cell covers video ads only. Platform-wide and objective-level hook rates are left out on purpose, because their impressions include image and carousel ads that cannot earn a 3-second play.

A quarter of video-running accounts sat under 15.81%, and a quarter cleared 29.11%. So a 30.00% hook rate, such as 60,000 plays from 200,000 impressions, already sits above the 75th percentile.

Most published hook rate ranges give no sample size or date. Treat this one as a reference point for Meta video in October 2026, not a target for every ad. Placement mix, audience temperature and video length all move it.

Download the hook rate cell as a CSV (hook-rate-benchmarks-2026-10.csv).

2. Quick answers

What is hook rate?

Hook rate is the share of impressions that turned into a 3-second video play. Divide 3-second plays by impressions and multiply by 100. In GoMarble's October 2026 benchmarks, the median Meta video ad account had a hook rate of 22.15%, with the middle half of 680 accounts between 15.81% and 29.11%.

What is a typical hook rate for Meta video ads?

In October 2026 the median was 22.15% across 680 Meta Ads accounts running video, from GoMarble's monthly benchmarks. The 25th percentile was 15.81% and the 75th was 29.11%. These quartiles count each account once and cover video ads only, so image and carousel impressions do not drag the number down.

How many 3-second plays do I need to reach a target hook rate?

Multiply impressions by the target and divide by 100, rounding up. At 40,000 impressions, reaching the 75th percentile of Meta video ads in GoMarble's October 2026 data, 29.11%, takes 11,644 three-second plays. The preset buttons in the calculator fill in the 25th percentile, median and 75th percentile for you.

Do video ads get a higher CTR than image ads on Meta?

In GoMarble's October 2026 benchmarks they did at the median: 2.38% across 680 video-running accounts against 2.07% across 700 image-running accounts. Carousel ads had a median CTR of 2.02%. Image ads had the higher median ROAS, 2.53 against 2.35, so read return as well as clicks.

3. How to calculate hook rate

Hook rate uses two columns you can pull from Meta Ads Manager for any video ad: impressions and 3-second video plays. Many teams save it as a custom metric so it sits next to CTR in every report.

Hook rate = 3-second plays ÷ impressions × 100

Step by step, with the calculator's example numbers:

  • Hook rate. Divide 3-second plays by impressions: 22,150 ÷ 100,000 × 100 = 22.15%. That lands at the October 2026 median.
  • Hold rate. Divide ThruPlays by 3-second plays: 5,000 ÷ 22,150 × 100 = 22.57%. Meta counts a ThruPlay when a video plays to the end or for at least 15 seconds.
  • Plays needed. Multiply impressions by the target and divide by 100: 40,000 × 29.11 ÷ 100, rounded up, is 11,644 plays.

Watch the denominator. Some tools divide 3-second plays by reach, or by total video plays, and those versions run higher. They are not comparable with the quartiles on this page, which always use impressions.

4. Reading your hook rate

Hook rate measures the first few seconds and nothing after them. A video can stop the scroll and still lose people before the offer. That is why the calculator pairs it with hold rate, and why CTR and conversion rate sit in the format table.

  • Compare like with like. Placements differ, so compare one ad against others running on the same placements.
  • Give it enough impressions. A rate from a few hundred impressions moves a lot from day to day. Before calling one hook stronger, check the gap with the A/B test calculator.
  • Change one thing. When you test openings, keep the rest of the video the same. The video ad hooks guide lists opening types worth trying.
  • Follow the click. Read hook rate next to click rate. The CTR calculator places your CTR against the same October 2026 sample.

For a full account check, where hook rate is one line among spend, frequency and conversion metrics, follow the Meta Ads account audit workflow.

5. Methodology

The rows on this page are Meta ad-format cells from GoMarble's monthly benchmark file for October 2026: video, image and carousel. Hook rate is reported for video ads only.

  • Sample: 1,900 ad accounts from 490 companies, with $17.4M of USD spend analysed. Format cells total each account's ads of that format, an account counts once per cell, and the same thresholds apply. The video cell covers 680 accounts, the image cell 700 and the carousel cell 280. CPM and CPA use USD-denominated accounts only. Conversion rate, ROAS and CPA use accounts with at least 10 purchases in the month.
  • Period: October 2026, 1 to 31 October. File generated on 17 November 2026.
  • Method: Account-level metrics per month, deduplicated across GoMarble teams, from Meta and Google Ads campaign data. Quartiles are across ad accounts. CTR counts all clicks. Cost metrics (CPM, CPC, CPA, CPL) use USD-denominated accounts only. ROAS, conversion rate and CPA use only accounts with at least 10 purchases (Meta) or conversions (Google) in the month, valued as each platform reports them.
  • Deduplication: metrics are account-level per month and deduplicated across GoMarble teams.
  • Currency: cost metrics (CPM, CPC, CPA, CPL) use USD-denominated accounts only.
  • Privacy thresholds: a cell is published only with at least 20 ad accounts from at least 10 companies, and no account above 25% of its spend. In this release 21 cells passed and 9 were suppressed, not estimated.
  • Scope: no industry split exists in this release, and no customer, agency or brand is named.

Cite this

GoMarble (2026). Meta video ad hook rate benchmarks, with video, image and carousel cells, October 2026. Data: October 2026. https://www.gomarble.ai/ai-tools/hook-rate-calculator/

Reuse the hook rate quartiles and the format table under CC BY 4.0, crediting GoMarble with a link to this calculator. License · Download the CSV

FAQ

Is thumbstop ratio the same as hook rate?
Usually, yes. Most people use thumbstop ratio for the same calculation: 3-second plays divided by impressions. Check the denominator before comparing numbers from another source.
Why is my hook rate different in another tool?
Some tools divide by reach or by video plays instead of impressions. Both give higher numbers than this calculator, and neither is comparable with the October 2026 quartiles here.
Is there a benchmark for hold rate?
Not from GoMarble yet. The October 2026 file has no hold rate cell, so the calculator shows your hold rate without a position.
Why is there no hook rate for image or carousel ads?
Images cannot earn a 3-second video play, so a hook rate for them would be meaningless. The benchmark file reports hook rate for video ads only.
Why is the carousel CPA blank?
No carousel CPA cell was published for October 2026, so the table leaves it blank rather than estimating it.
Are the benchmarks spend-weighted?
No. Each ad account counts once, so the median is the middle account, not the middle dollar.

See which video openings hold attention.

Connect Meta Ads, and GoMarble AI Agents analyse creative and diagnose performance by campaign, then propose changes for your approval.

Analyse your video hooks with AI Agents Start Free Trial